"

How to Change Engine Oil for a Wheel Loader

Note: While the general process of changing engine oil is similar across different machines, specific procedures may vary. Always consult your vehicle's owner's manual for detailed instructions.


Materials Needed:

  • Engine oil (appropriate type and quantity)
  • Oil filter
  • Oil filter wrench
  • Drain pan
  • Rags


Steps:

  1. Warm Up the Engine: A warm engine allows the oil to flow more easily.
  2. Park the Wheel Loader: Park the wheel loader on a level surface and engage the parking brake.
  3. Locate the Oil Drain Plug: It's typically located at the bottom of the engine block.
  4. Place the Drain Pan: Position the drain pan beneath the oil drain plug.
  5. Loosen the Drain Plug: Carefully loosen the plug using a wrench, allowing the oil to drain into the pan.
  6. Replace the Drain Plug: Once the oil has drained completely, tighten the drain plug securely.
  7. Locate the Oil Filter: It's usually attached to the engine block.
  8. Remove the Old Filter: Use an oil filter wrench to loosen and remove the old filter.
  9. Apply New Oil to the Gasket: Apply a thin coat of fresh oil to the gasket of the new oil filter.
  10. Install the New Filter: Screw on the new filter, tightening it by hand.
  11. Locate the Oil Filler Cap: It's usually on the top of the engine.
  12. Add New Oil: Remove the oil filler cap and pour in the recommended amount of new engine oil.
  13. Check the Oil Level: Use the dipstick to measure the oil level and add more oil if necessary.
  14. Replace the Oil Filler Cap.
  15. Start the Engine: Start the engine and let it run for a few minutes.
  16. Check the Oil Level Again: Re-check the oil level and add more oil if needed.


Additional Tips:

  • Consult Your Owner's Manual: This will provide specific instructions for your wheel loader model.
  • Dispose of Used Oil Properly: Recycle it at a designated facility.
  • Regular Oil Changes: Adhere to the recommended oil change intervals to ensure optimal engine performance.

By following these steps and consulting your owner's manual, you can successfully change the engine oil in your wheel loader.

Note: For other types of machinery like diesel forklifts, backhoes, mini excavators, and electric forklifts, the specific procedures may vary. Always refer to the manufacturer's recommended maintenance schedule and guidelines.


Post time:Mar.16.2021


  • PREVIOUS:CCTV collected the brand MYZG
  • NEXT:How to change the antifreeze of the loader?

  • RELATED NEWS

    Facebook

    Twitter

    Linkedin

    Pinterest

    Youtube

    whatsapp

    Email

    Phone

    QQ

    Leave a message