1. Clean the scale and dust on the surface of the forklift generator in time and maintain good ventilation.
2. Frequently check the tightening condition of the fasteners related to the forklift generator and tighten the screws in time.3. The tension of the transmission belt must be appropriate. If it is too loose, it will easily slip and cause insufficient power generation; if it is too tight, it will easily damage the belt and generator bearings.
4. When installing the battery, be sure not to install it incorrectly. Usually, install the positive wire first and not the ground wire, otherwise the diode will easily burn out.
5. When using an integrated circuit regulator, the ignition switch should be turned off immediately when the engine is not running.
6. It is never allowed to use the "scratching" method to test whether to generate electricity.
7. When the generator fails to generate electricity, it must be eliminated in time, otherwise it will cause a more serious failure.
Post time:Dec.06.2023
