1. Timely clean the scale and dust on the surface of the forklift generator and keep the ventilation good.
2. Often check the fastening of the fasteners related to the forklift generator, and tighten the screws in time.
3. The tension of the transmission belt should be appropriate. Too loose, easy to slip and cause insufficient power generation; Too tight, easy to damage the belt and generator bearings.
4. When installing the battery, do not install the wrong, usually install the positive wire first, do not install the wire, otherwise it is easy to burn the diode.
5. When the integrated circuit regulator is used, the ignition switch should be turned off immediately when the engine is not running.
6 It is not allowed to use the "scraping fire" method to test whether power generation.
7 When the generator has a fault and does not generate power, it should be eliminated in time, otherwise it will cause more serious failures.
Post time:Mar.06.2024
