1. Turn the key to start the lift trucks and make sure the forks are all the way back. The forks should be angled slightly higher when traveling. Never operate a vehicle while the forks are extended.
2. For steering, stand-up forklifts substitute a control handle for the standard steering wheel. To move, place your foot firmly on the power pedal and tilt the control lever in the desired direction. like toyota forklifts
3. Be sure to use your horn to alert drivers following you when you reverse, and make sure the area is free by looking about.
4. Next, carefully pull the steering wheel in your direction while depressing the brake to begin going backward. Place the forklift in front of the rack holding the load to be picked up.
5. Take your foot off the acceleration pedal and return the control handle to its starting position to stop the forklift.
6. Lift the forks to the height of the pallet after leveling them. As you slowly advance, hit the button next to the control handle to lengthen the forks. Lift the load gradually after the forks are securely in place, then pull them back. When moving, be sure to keep the burden two inches off the ground. Just like cat forklift.
Post time:Jun.18.2024
