How to Read a Telescopic Loader Load Chart for Lift Height, Reach and Attachments

How to Read a Telescopic Loader Load Chart for Lift Height, Reach and Attachments

Buyer question

A telescopic loader load chart links capacity to boom angle, extension, attachment and stabilizer condition. The largest capacity shown on the machine is not available at every height and forward reach, so the exact working point must be checked.

Send the load weight, dimensions, center of gravity, pickup height, placement height and horizontal distance from the machine. Pallet forks, buckets, bale clamps and other attachments change the effective load center and residual capacity.

In a narrow European-style yard case, the operator used forks for pallet placement and a bucket for loose material. The route was measured at full steering lock, and delivery areas were reorganized so the boom did not need to travel over pedestrians.

Short answer

Confirm tire type, steering modes, boom suspension, hydraulic flow, coupler compatibility and cab visibility. Keep loads low during travel, avoid side slopes where prohibited and use stabilizers only according to the approved configuration and surface.

Begin with the complete work cycle rather than a maximum specification. Record access, positioning, lifting, task time, lowering, travel and waiting during a representative shift. The machine should remove the real bottleneck while preserving a controlled route and practical service access.

review the matching product: European telescopic loader ZGLOADER / MYZG.

Measure the narrowest doorway, lowest overhead point, turning space, slope, floor edge and final working position. Include handles, thresholds, pipes, parked equipment and temporary obstacles. A scaled sketch and clear site photos let the supplier check access before production.

Site measurements

Rated capacity must be reviewed in the final configuration. Operators, tools, material, bucket or attachment weight, load center, outreach and lift height can reduce usable performance. Ask for written confirmation of the selected machine and attachment combination.

Ground or floor conditions affect traction, braking, stability and comfort. Describe concrete strength, tiles, damaged paving, gravel, mud, drains and gradients. The safest selection is based on the most demanding normal condition, not the easiest demonstration surface.

Visibility matters during travel, alignment and placement. Mirrors, cameras, lights and alarms can support the operator, but they do not replace a segregated route, trained personnel, suitable speed and a spotter when the view is restricted.

Capacity and stability

Before every shift, inspect structural parts, pins, hoses, wheels or tires, controls, brakes, steering, warning devices, guards and visible leaks. Any defect affecting control, stability or load retention must be corrected before the equipment returns to service.

Plan maintenance before delivery. Confirm service intervals, filters, lubricants, battery or engine support, manuals, diagnostics and a starter stock of common parts based on annual hours. Easy access to daily checks reduces avoidable downtime.

compare the complete equipment range: European telescopic loader ZGLOADER / MYZG.

Compare ownership cost through productive cycles, not purchase price alone. Include energy or fuel, labor, transport, attachment changes, routine service, tires, downtime and resale. A slightly different configuration can be less expensive when it completes the task with fewer movements.

Application case

A useful quotation request states destination, quantity, operating hours, climate, certification, task dimensions, working material, required height and requested attachments. This gives purchasing, operators and the factory one written reference for the order.

Shandong Zhuogong Machinery equipment Co.,Ltd supplies practical equipment under the listed brands and can review drawings, jobsite photos and load information. Final operation must follow the machine manual, local rules and trained supervision.

A telescopic loader load chart links capacity to boom angle, extension, attachment and stabilizer condition. The largest capacity shown on the machine is not available at every height and forward reach, so the exact working point must be checked.

Safety planning

Send the load weight, dimensions, center of gravity, pickup height, placement height and horizontal distance from the machine. Pallet forks, buckets, bale clamps and other attachments change the effective load center and residual capacity.

In a narrow European-style yard case, the operator used forks for pallet placement and a bucket for loose material. The route was measured at full steering lock, and delivery areas were reorganized so the boom did not need to travel over pedestrians.

learn about the supplier and support: European telescopic loader ZGLOADER / MYZG.

Confirm tire type, steering modes, boom suspension, hydraulic flow, coupler compatibility and cab visibility. Keep loads low during travel, avoid side slopes where prohibited and use stabilizers only according to the approved configuration and surface.

Ownership and service

Begin with the complete work cycle rather than a maximum specification. Record access, positioning, lifting, task time, lowering, travel and waiting during a representative shift. The machine should remove the real bottleneck while preserving a controlled route and practical service access.

Measure the narrowest doorway, lowest overhead point, turning space, slope, floor edge and final working position. Include handles, thresholds, pipes, parked equipment and temporary obstacles. A scaled sketch and clear site photos let the supplier check access before production.

Rated capacity must be reviewed in the final configuration. Operators, tools, material, bucket or attachment weight, load center, outreach and lift height can reduce usable performance. Ask for written confirmation of the selected machine and attachment combination.

Request a matched quotation

Ground or floor conditions affect traction, braking, stability and comfort. Describe concrete strength, tiles, damaged paving, gravel, mud, drains and gradients. The safest selection is based on the most demanding normal condition, not the easiest demonstration surface.

Contact for model selection and quotation

Shandong Zhuogong Machinery equipment Co.,Ltd
ZGLOADER / MYZG
WhatsApp: +86 131 7691 0558
Email: MYZG@my-forklift.com
Website: https://www.my-forklift.com/