ZGLOADER / MYZG 3T Rear-Steering Rough Terrain Forklift

The ZGLOADER / MYZG 3T rear-steering rough terrain forklift is designed for businesses that must move pallets, timber, bagged materials, steel or equipment across prepared gravel, compacted soil and uneven outdoor yards. Shandong Zhuogong Machinery equipment Co.,Ltd presents this page around the exact verified source model, not a generic capacity label. Rear-wheel steering supports positioning in busy sites, while the operator still needs a planned route, stable ground, trained traffic control and a load matched to the delivered capacity chart.

Application-led outdoor material handling

Confirmed source data for this 3T model includes 3000 kg, 4110 kg, 500 mm, 1220 mm, QUANCHAI 4B2-52M22, 38 kW, 2400 r/min, 4980 × 1920 × 2180 mm, 4000 mm, 20.5-16, 2850 mm, 28 km/h, 2165 mm. These figures support preliminary selection only. The final quotation must identify mast, tyres, cab, forks, hydraulics, attachment, emission package and transport dimensions. Usable residual capacity changes with lift height, load center, fork length and attachment mass, so nominal capacity must never be treated as available in every condition.

compare all MYZG products

Verified source specifications

explore the rough-terrain range

Where rear steering adds value

Rear steering is valuable when a long outdoor forklift must align with trucks, pallet stacks or timber packs in a limited yard. The rear of the machine swings during a turn, so the benefit comes with a specific safety need: mark the tail-swing zone, separate pedestrians, use a spotter where visibility is restricted and approach loads squarely. Buyers should compare turning radius with the narrowest real junction instead of assuming that rear steering makes every aisle suitable.

Selection and buying guide

A useful buying request begins with the heaviest normal load, load dimensions, actual load center, pickup and placement height, narrowest gateway, turning space, slope, surface photographs, climate and daily cycles. Compare the verified 3T data with transport restrictions and local service capacity. Ask the quotation to separate standard equipment from options, state tyre pattern and mast configuration, list included documents and confirm the capacity chart for the chosen forks or attachment.

Surface, load and stability planning

Rough-terrain capability is not permission to drive anywhere. Deep mud, loose sand, hidden edges, cross slopes and weak fill can compromise traction or stability. Inspect drainage and ground bearing condition, carry loads low, reduce speed before turning and avoid sudden braking. The 20.5-16 source tyre and 2850 mm turning radius should be evaluated against wet-season conditions. A site-specific route plan is more useful than a broad all-terrain claim.

Industry applications and cycle design

Typical applications include construction material delivery, farm feed and fertilizer movement, timber-yard handling, quarry supplies, infrastructure storage and outdoor rental fleets. Plan each cycle from pickup to placement: pallet condition, fork entry, travel direction, blind corners, stopping point and safe unloading. The generated work-scene images illustrate common tasks but do not replace the delivered manual, operator training, site assessment or local workplace rules.

read application and buying guides

Maintenance and ownership cost

Total ownership cost includes diesel, tyres, filters, hydraulic oil, mast chains, forks, brakes, training, transport, scheduled service, unscheduled downtime and residual value. Before every shift inspect tyre damage and pressure, wheel fasteners, fork wear, carriage, chains, rollers, hoses, cylinders, steering play, brakes, lights and leaks. Clean cooling packs in dusty work and follow the delivered manual; service intervals should reflect actual hours, temperature and contamination.

Parts and after-sales continuity

Parts continuity begins with the serial-numbered machine. Record engine plate, transmission reference, mast, carriage, fork dimensions, tyre specification, filter numbers and hydraulic component labels. A practical initial package may include confirmed filters, seals, hoses, pins, bushes and common electrical items. ZGLOADER / MYZG can support identification, manuals, packing and remote troubleshooting, while qualified local technicians perform isolation, repair and functional testing.

Dealer and rental business guidance

Dealers and rental companies can build demand by demonstrating a real cycle instead of listing only capacity. Qualify customers by load, terrain, turning space, operator skill, service distance and seasonal conditions. Provide a pre-use checklist, handover training, tyre and fork inspection, planned maintenance and a local parts route. Any cooperation example should be shared only with permission; this page does not invent customer names, savings percentages, fleet numbers or performance records.

CE, EPA and export confidence

CE-related documentation, EPA or engine-emission applicability and local registration depend on the final engine, configuration and destination. No certificate number is claimed here, and a logo is not treated as proof. Before purchase, ask for the applicable declaration, engine information, manuals, labels, inspection records, packing list and shipping documents. The importer should confirm workplace, road-use, noise, lighting and operator requirements with local authorities or competent professionals.

Frequently asked buyer questions

Buyers often ask whether rear steering eliminates the need for a large turning area, whether rated capacity applies at every height and whether rough-terrain tyres make slopes automatically safe. The answer is no. Tail swing still needs clearance; capacity depends on load center, mast and attachment; and safe travel depends on grade, surface, speed and load position. Request a written configuration review based on site photos and the actual pallet rather than relying on a general description.

Request a job-matched quotation

For a configuration-based quotation, send load weight and dimensions, pallet or material type, lift height, site photos, route width, turning intersections, slope, ground condition, daily hours, climate, attachment needs, destination port and required documents. The MYZG export team can then compare the verified 3T platform with the job, confirm options, prepare packing information and recommend a startup parts plan. This application-first process supports safer procurement and more predictable long-term operation.

request a configuration and quotation

Shandong Zhuogong Machinery equipment Co.,Ltd — ZGLOADER / MYZG

WhatsApp / Skype / WeChat: +86 13176910558 | Corporate email: MYZG@my-forklift.com