When passing bridges, pay attention to the load capacity and driving speed limited by traffic signs, and passing at a constant speed after confirming that you can pass. Avoid changing speeds, braking and stopping on bridges.
When wading, you should pass when the engine is normally powerful and the steering mechanism is flexible and reliable, and you should know the depth of the river, the velocity of the flow, and the conditions of the river bed before passing. The wading depth must not exceed the height of the engine oil pan from the ground.
After wading, stop the machine immediately for inspection. If the brake is found to be malfunctioning due to water immersion, perform continuous braking and use heat to remove the moisture in the brake pads, so as to restore the brake to normal as soon as possible.
When the loader is working, no one is allowed to stand under the bucket.
When the operator leaves the driving carbon, the bucket must be lowered to the ground.
If you have any other question you want to know, contact with me freely.
Post time:Feb.03.2023
